1.8.1. Adjustment of provision of seats
For ensuring the most convenient landing of people of different growth and a constitution the provision of seats of the driver and forward passenger can be changed both in the longitudinal direction, and on a back tilt angle. Besides, also adjustment of a head restraint on height is possible.
Regulate the provision of a seat of the driver only on the motionless car. If in attempt of adjustment in the movement you indistinctly record a seat in the longitudinal direction and it will unexpectedly move, then it is possible to lose control over the car.
For adjustment of provision of front seats in the longitudinal direction pull the handle of the blocking lever up and move a seat on a sled to a comfortable position. After installation of a seat lower the handle and small movements of a seat back and forth achieve its reliable fixing.
For adjustment of an inclination of a back pull the hinge lever handle located on the left side of a seat up, and move a seatback to a comfortable position.
Head restraints of front seats can be regulated on height: press a clamp and move a head restraint up or down on the required height. The optimum provision of a head restraint — its top edge is located flush with the top part of the head.
For people of very high growth lift a head restraint in extreme top situation, for people of very low growth lower a head restraint in extreme lower situation.
If necessary (for example, for unfolding of a seat in sleeping situation) the head restraint can be removed.
The back of a back seat can be put completely, on 2/3 or 1/3. To put a back …
… pull a clamp up …
… also put the left part of a back (2/3 seatbacks). The right part of a seatback develops similarly.