Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Assembly blocks
10.3. Rechargeable battery
10.4. Generator
10.5. Starter
10.6. Switch (lock) of ignition
10.7. Control system of the engine
10.8. Lighting, light and sound alarm system
10.9. Replacement of a motor-reducer of a screen wiper of a wind window
10:10. Removal and installation of a washer of glass of a wind window
10:11. Removal and installation of the electric motor of the main fan of a radiator of the cooling system of the engine
10:12. Removal and installation of the electric motor of the additional fan of a radiator of the cooling system of the engine
10:13. Back window glass electrical heating
10:14. Removal and installation of the boss of the lighter
10:15. Combination of devices
10.15.1. Features of a design
10.15.2. Possible malfunctions of a combination of devices, their reasons and ways of elimination
10.15.3. Removal and installation of a combination of devices
10.15.4. Replacement of control lamps and lamps of illumination of a combination of devices
10.15.5. Replacement of devices
10:16. Dashboard switches
10:17. Replacement of control units of electrowindow regulators
10:18. Automobile audio system
10:19. Replacement of sensors and switches
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








10-15-3-snyatie-i-ustanovka-kombinacii-priborov.html

10.15.3. Removal and installation of a combination of devices

You will need the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove the control unit of system of heating and conditioning (see. "Removal and installation of the control unit of system of heating and conditioning"), without disconnecting from it a block of a plait of wires; lower a little down to get access to screws of fastening of facing of the dashboard …
3. … also turn out screws.
4. Remove the regulator of the electroproofreader of light of headlights (see. "Replacement of the regulator of the electroproofreader of light of headlights") …
5. … also turn out two screws of fastening of facing located behind it.
6. Turn out two screws of fastening of facing located over a combination of devices …
7. … take away facing from the dashboard …
8. … disconnect blocks of a plait of wires from switches and remove facing of the dashboard.
9. Turn out four screws of fastening of a combination of devices …
10. … take away it from the dashboard, disconnect three blocks of a plait of wires and remove a combination of devices from the car.
11. Establish details as it should be, the return to removal.

"previous page
10.15.2. Possible malfunctions of a combination of devices, their reasons and ways of elimination
following page"
10.15.4. Replacement of control lamps and lamps of illumination of a combination of devices