Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Assembly blocks
10.3. Rechargeable battery
10.4. Generator
10.5. Starter
10.6. Switch (lock) of ignition
10.7. Control system of the engine
10.8. Lighting, light and sound alarm system
10.9. Replacement of a motor-reducer of a screen wiper of a wind window
10:10. Removal and installation of a washer of glass of a wind window
10:11. Removal and installation of the electric motor of the main fan of a radiator of the cooling system of the engine
10:12. Removal and installation of the electric motor of the additional fan of a radiator of the cooling system of the engine
10:13. Back window glass electrical heating
10:14. Removal and installation of the boss of the lighter
10:15. Combination of devices
10:16. Dashboard switches
10:17. Replacement of control units of electrowindow regulators
10:18. Automobile audio system
10:19. Replacement of sensors and switches
10.19.1. Replacement of the sensor of an alarm lamp of emergency pressure drop of oil
10.19.2. Check and replacement of the sensor of the index of temperature of cooling liquid
10.19.3. Check and replacement of the sensor of the index of level of fuel
10.19.4. Check and replacement of the switch of light of a backing
10.19.5. Replacement of the switch of a stoplight
10.19.6. Replacement of the switch of an alarm lamp of turning on of the parking brake
10.19.7. Replacement of switches of a plafond of illumination of salon
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








10-19-1-zamena-datchika-signalnojj-lampy-avarijjnogo-padeniya-davleniya-masla.html

10.19.1. Replacement of the sensor of an alarm lamp of emergency pressure drop of oil

The sensor of an alarm lamp of emergency pressure drop of oil is screwed in the case of the oil pump.
You will need a high face head "on 24".
1. Install the car on the elevator or a viewing ditch and disconnect a wire from the minus plug of the rechargeable battery.
2. Wring out a clamp and disconnect a block of a plait of wires from the sensor.
3. Turn out the sensor from the case of the oil pump …
4. … also remove it.

    
NOTE
Replace a copper sealing washer of an alarm lamp of emergency pressure drop of oil, new at each removal of the sensor.

5. Install the sensor of an alarm lamp of emergency pressure drop of oil as it should be, the return to removal.

"previous page
10:19. Replacement of sensors and switches
following page"
10.19.2. Check and replacement of the sensor of the index of temperature of cooling liquid