Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Assembly blocks
10.3. Rechargeable battery
10.4. Generator
10.5. Starter
10.6. Switch (lock) of ignition
10.7. Control system of the engine
10.8. Lighting, light and sound alarm system
10.8.1. Features of a design
10.8.2. Replacement of lamps
10.8.3. Replacement of block headlights
10.8.4. Replacement of the electroproofreader of light of headlights
10.8.5. Replacement of a side lamp of the index of turn
10.8.6. Replacement of a back lamp
10.8.7. Replacement of an additional stoplight
10.8.8. Replacement of lamps of illumination of registration plate
10.8.9. Replacement of a plafond of illumination of salon
10.8.10. Replacement of a plafond of illumination of a luggage carrier
10.8.11. Check and replacement of understeering switches
10.8.12. Removal, installation and adjustment of a sound signal
10.9. Replacement of a motor-reducer of a screen wiper of a wind window
10:10. Removal and installation of a washer of glass of a wind window
10:11. Removal and installation of the electric motor of the main fan of a radiator of the cooling system of the engine
10:12. Removal and installation of the electric motor of the additional fan of a radiator of the cooling system of the engine
10:13. Back window glass electrical heating
10:14. Removal and installation of the boss of the lighter
10:15. Combination of devices
10:16. Dashboard switches
10:17. Replacement of control units of electrowindow regulators
10:18. Automobile audio system
10:19. Replacement of sensors and switches
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








10-8-11-proverka-i-zamena-podrulevykh-pereklyuchatelejj.html

10.8.11. Check and replacement of understeering switches

It will be required to you: screw-drivers with flat and crosswise edges.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a steering wheel (see. "Removal and installation of a steering wheel").
3. Remove a casing of a steering column (see. "Replacement of contact group of the switch (lock) of ignition").
4. Squeeze clamps and take the switch of indexes of turn and light of headlights from a connector.
5. Squeeze a clamp and disconnect a block of a plait of wires from the switch.
6. Squeeze a clamp and separate an additional block.
7. Squeeze clamps, take the switch of a cleaner and washer of a windshield from a connector …
8. … also disconnect from it a block of a plait of wires, having squeezed its clamp.
9. Establish details as it should be, the return to removal.
Assembled with a connector carry out removal of understeering switches in the following order.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a steering wheel (see. "Removal and installation of a steering wheel").
3. Remove casings of a steering column (see. "Replacement of contact group of the switch (lock) of ignition").
4. Turn out four screws of fastening …
5. … also remove the lower facing of the dashboard.
6. Squeeze clamps and separate big …
7. … and small blocks of a plait of wires of a contact ring of a safety cushion.
8. Disconnect the holder of a collar of a plait of wires of a contact ring from an arm on a steering column.
9. Turn out four screws of fastening …
10. … also remove a contact ring of a safety cushion.
11. Turn out two screws of fastening of a connector to a steering column.
12. Disconnect from understeering switches of a block of a plait of wires and separate an additional block of the switch of indexes of turn and light of headlights.
13. Remove a connector from a steering column and disconnect from it a wire.
14. Establish details as it should be, the return to removal.
Serviceability of understeering switches is defined, checking correctness of short circuit of contacts at various provisions of levers. Remove switches for check and connect a control lamp on 12 V (with a current source) or an autotester with the pro-calls function of a chain to the corresponding conclusions specified in tab. 10.7 and 10.8. Transfer the switch lever to the situation corresponding to the checked contacts, – the lamp has to light up. Otherwise the switch is faulty.

The table 10.7 Short Circuit of Contacts at various provisions of the lever of the switch of indexes of turn and light of headlights

The table 10.8 Short Circuit of Contacts at various provisions of the lever of the switch of a screen wiper and a washer

"previous page
10.8.10. Replacement of a plafond of illumination of a luggage carrier
following page"
10.8.12. Removal, installation and adjustment of a sound signal