Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Assembly blocks
10.3. Rechargeable battery
10.4. Generator
10.5. Starter
10.6. Switch (lock) of ignition
10.7. Control system of the engine
10.8. Lighting, light and sound alarm system
10.8.1. Features of a design
10.8.2. Replacement of lamps
10.8.3. Replacement of block headlights
10.8.4. Replacement of the electroproofreader of light of headlights
10.8.5. Replacement of a side lamp of the index of turn
10.8.6. Replacement of a back lamp
10.8.7. Replacement of an additional stoplight
10.8.8. Replacement of lamps of illumination of registration plate
10.8.9. Replacement of a plafond of illumination of salon
10.8.10. Replacement of a plafond of illumination of a luggage carrier
10.8.11. Check and replacement of understeering switches
10.8.12. Removal, installation and adjustment of a sound signal
10.9. Replacement of a motor-reducer of a screen wiper of a wind window
10:10. Removal and installation of a washer of glass of a wind window
10:11. Removal and installation of the electric motor of the main fan of a radiator of the cooling system of the engine
10:12. Removal and installation of the electric motor of the additional fan of a radiator of the cooling system of the engine
10:13. Back window glass electrical heating
10:14. Removal and installation of the boss of the lighter
10:15. Combination of devices
10:16. Dashboard switches
10:17. Replacement of control units of electrowindow regulators
10:18. Automobile audio system
10:19. Replacement of sensors and switches
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








10-8-2-zamena-lamp.html

10.8.2. Replacement of lamps

For replacement of lamps of a block headlight execute the following operations.
1. Open a cowl.
2. Disconnect a wire from the minus plug of the rechargeable battery...
3. … turn a headlight cover counterclockwise …
4. … also uncover.

    
NOTES
Replacement of lamps of a left headlight is shown. Lamps in a right headlight are symmetrized, replace them similarly.
The cover of a headlight is condensed with a rubber ring. Replace strongly pressed out or torn ring new.

5. Disconnect a block of a plait of wires from a lamp of passing/driving beam.
6. Bring a spring clamp out of hooks on a reflector, cast away a clamp...
7. … also take out a lamp of head light.

    
PREVENTION
Do not touch by lamp flask fingers as the galogenovy lamp strongly heats up and fatty spots will cause darkening of a flask. Take a lamp for a flask only in pure gloves or a pure rag. If on a lamp after all there were fatty spots, remove them with alcohol.

8. Insert a new lamp into a reflector and record it the spring holder.
9. Extend a cartridge of a lamp of dimensional light from a nest (the boss is established with a small tightness) and take it from a block headlight.
10. Take a bestsokolny lamp from the boss.
11. Insert a new lamp into a cartridge and establish a cartridge into place.
12. Establish into place a headlight cover.
13. Turn a cartridge of a lamp of the index of turn counterclockwise …
14. … also take it from a block headlight.
15. Press a lamp, turn it counterclockwise and take from the boss.
16. Establish a new lamp in a cartridge, and a cartridge in a block headlight.

For replacement of a lamp of a side lamp of indexes of turn execute the following operations.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Shift the case of the index of turn back …
3. … also take it from a wing.
4. Turn a cartridge counterclockwise …
5. … also take it from an index lamp.
6. Take a lamp from the boss.
7. Insert a new lamp into a cartridge, and a cartridge in the index case.
8. Establish a side lamp of indexes of turn as it should be, the return to removal.

For replacement of any lamp in a back lamp execute the following operations.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Open a luggage carrier.
3. Squeeze clamps and open a cover in facing of a luggage carrier for access to a lamp.
4. Turn a cartridge of a lamp counterclockwise …
5. … also take it from a lamp.
6. Press a lamp, turn it counterclockwise and take out from the boss.
7. At installation of a new lamp ledges on a lamp have to get to cuts on the boss. Then record a lamp in the boss, having turned it against the stop (on 90 °) clockwise.
8. Establish details as it should be, the return to removal.
9. Other lamps in a back lamp replace similarly.

For replacement of a lamp in a lamp of illumination of registration plate execute the following operations.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a lamp of illumination of registration plate (see. "Replacement of lamps of illumination of registration plate").
3. Take a bestsokolny lamp from the boss.
4. Establish a new lamp.
5. Establish details as it should be, the return to removal.

For replacement of a lamp in an additional stoplight execute the following operations.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Turn a cartridge of a lamp of an additional stoplight counterclockwise and remove it (operation is performed from a luggage carrier).
3. Press a lamp, turn it counterclockwise and take out from the boss.
4. Establish details as it should be, the return to removal.

    
NOTE
One of ledges on the boss of a lamp of the already others. At installation orient a cartridge so that it coincided with narrower cut (it is shown by an arrow), and turn a cartridge clockwise against the stop.

For replacement of a lamp in a plafond of illumination of salon execute the following operations.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Wring out the screw-driver clamps and remove the lens of a plafond.
3. Wring out spring contact and take a lamp.
4. Insert a new lamp.
5. Install at first a forward part of the lens in the plafond case …
6. … and then press a back part before click (a zashchelkivaniye of clamps).

For replacement of a lamp in a plafond of illumination of a luggage carrier execute the following operations.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Overcoming effort of a clamp, take a plafond from an opening in a car body (if necessary hook it the screw-driver).
3. Wring out spring contact and take a lamp.
4. Insert a new lamp into a plafond.
5. Establish details as it should be, the return to removal.

"previous page
10.8.1. Features of a design
following page"
10.8.3. Replacement of block headlights