Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Assembly blocks
10.3. Rechargeable battery
10.4. Generator
10.5. Starter
10.6. Switch (lock) of ignition
10.7. Control system of the engine
10.8. Lighting, light and sound alarm system
10.8.1. Features of a design
10.8.2. Replacement of lamps
10.8.3. Replacement of block headlights
10.8.4. Replacement of the electroproofreader of light of headlights
10.8.5. Replacement of a side lamp of the index of turn
10.8.6. Replacement of a back lamp
10.8.7. Replacement of an additional stoplight
10.8.8. Replacement of lamps of illumination of registration plate
10.8.9. Replacement of a plafond of illumination of salon
10.8.10. Replacement of a plafond of illumination of a luggage carrier
10.8.11. Check and replacement of understeering switches
10.8.12. Removal, installation and adjustment of a sound signal
10.9. Replacement of a motor-reducer of a screen wiper of a wind window
10:10. Removal and installation of a washer of glass of a wind window
10:11. Removal and installation of the electric motor of the main fan of a radiator of the cooling system of the engine
10:12. Removal and installation of the electric motor of the additional fan of a radiator of the cooling system of the engine
10:13. Back window glass electrical heating
10:14. Removal and installation of the boss of the lighter
10:15. Combination of devices
10:16. Dashboard switches
10:17. Replacement of control units of electrowindow regulators
10:18. Automobile audio system
10:19. Replacement of sensors and switches
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








10-8-8-zamena-fonarejj-osveshheniya-nomernogo-znaka.html

10.8.8. Replacement of lamps of illumination of registration plate

Lamps of illumination of registration plate are established in a decorative overlay of a trunk lid. They can be removed assembled with a slip (see. "Removal and installation of a decorative overlay of a trunk lid") or separately from it. In this subsection removal of lamps of illumination of registration plate without removal of a decorative slip is described.
You will need the screw-driver with a flat edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Turn out two screws of fastening of a lamp of illumination of registration plate.
3. Take a lamp from a decorative slip.
4. Turn a cartridge of a lamp counterclockwise and take it from a lamp of illumination of registration plate.
5. Establish details as it should be, the return to removal.

"previous page
10.8.7. Replacement of an additional stoplight
following page"
10.8.9. Replacement of a plafond of illumination of salon