Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal, dismantling and installation of bumpers
11.4. Removal and installation of facing of a radiator
11.5. Removal and installation of mudguards of wheels and flaps
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice of a box of airinflow
11.8. Cowl
11.9. Doors
11:10. Trunk lid
11.10.1. Replacement of torsions of a trunk lid
11.10.2. Removal and installation of a trunk lid
11.10.3. Replacement of the lock, latch and switch of the lock of a trunk lid
11.10.4. Removal and installation of the drive of the lock of a trunk lid
11.10.5. Removal and installation of a decorative overlay of a trunk lid
11:11. Cover of the hatch of a bulk pipe of the fuel tank
11:12. Seats
11:13. Removal and installation of facing of a tunnel of a floor
11:14. System of passive safety (SRS)
11:15. Rear-view mirrors
11:16. Dashboard
11:17. Heater and conditioner
11:18. Fittings of salon
11:19. Removal and installation of facings of salon
11:20. Removal and installation of facings of a luggage carrier
11:21. Screen wiper of a wind window
11:22. Replacement of a motionless glazing of a body
11:23. Removal and installation of the shelf of fastening of the rechargeable battery
11:24. Care of a body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








11-10-1-zamena-torsionov-kryshki-bagazhnika.html

11.10.1. Replacement of torsions of a trunk lid

You will need a reliable emphasis (for example, a wooden bar of suitable length).
1. Open a trunk lid and remove two rubber limiters of opening of a cover.
2. As is possible lift a trunk lid above and establish it on an emphasis.
3. Bring the torsion out of gearing with a loop of a trunk lid and with an arm on a body, and then remove the torsion.
4. Similarly remove the second torsion.
5. Install trunk lid torsions as it should be, the return to removal.

"previous page
11:10. Trunk lid
following page"
11.10.2. Removal and installation of a trunk lid