Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
12.1. Technical characteristics
12.2. Marking of rims
12.3. Marking of tires
12.4. Replacement of wheels
12.5. Running in of tires
12.6. Storage of tires
12.7. Balancing of wheels
12.8. Antisliding chains
12.9. Spare wheel
12:10. Check of pressure in tires
12:11. Check of a protector of tires
12:12. Check of the gate
12:13. Check of a radial and side beating of disks
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








12-13-proverka-radialnogo-i-bokovogo-bieniya-diskov.html

12:13. Check of a radial and side beating of disks

Fig. 12.1. Surfaces of measurement of a beating of a disk: N – a radial beating; S – side beating

Fix a disk without tire on an axis of the balancing device. Establish a measuring tip of the arrow indicator at first on radial, and then on side internal surfaces of a disk on which the board of the tire (fig. 12.1) leans.
Slowly turn hands a disk of the balancing device, at the same time taking readings of the indicator. At the same time do not consider an indicator arrow deviation from local ledges or deepenings on a disk.
If the maximum value of a beating exceeds admissible limits, replace a disk.

    
NOTE
Maximum beating of a steel disk: N = 0,8 mm, S = 1,0 mm.
Maximum beating of a light-alloy wheel: N = 1,5 mm, S = 1,5 mm.

"previous page
12:12. Check of the gate
following page"
13. Purchase of spare parts