Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
13.1. Engine oil
13.2. Plastic lubricants
13.3. Cooling liquids
13.4. Brake fluid
13.5. Fuel filter of thin cleaning
13.6. Air filter
13.7. Oil filter of the lubrication system of the engine
13.8. Spark plugs
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








13-1-motornoe-maslo.html

13.1. Engine oil

At the choice of engine oil first of all it is necessary to be guided by recommendations and requirements of manufacturer to quality and producer of engine oil.
The modern engine oils consisting of basic oils and the picked-up set of additives are divided into two main types:
mineral (received by distillation from oil) – their viscosity strongly depends on temperature. Various additives which, in turn, quickly enough collapse because of high mechanical and thermal loadings are applied to stabilization of properties, reducing oil service life;
synthetic (received by chemical synthesis) – have high uniformity and stability of properties. Remain more liquid on a frost and more dense during a heat, burn down in the engine less, form less deposits, have bigger service life.

    
NOTE
Synthetic oils do not destroy engine epiploons, however at their use emergence of a leak through worn-out epiploons owing to the bigger fluidity of synthetic oils in comparison with mineral is possible.
Service life of synthetic oils is only not much more, than mineral. Bystry darkening of oil testifies only to its good washing properties and the polluted lubrication system.

So-called semi-synthetic oils are intermediate. They are made on a mineral basis, but with additives of synthetic components therefore on quality approach synthetic oils, but is much cheaper than them.
One of the main properties of engine oil – its viscosity which determines the temperature range of use of engine oil. At a low temperature of air engine oil has to have low viscosity to provide launch of the engine and intake of engine oil to its knots. At high temperature engine oil has to be more viscous to support the required oil pressure in the lubrication system. On value of viscosity engine oils divide into three look:
– winter – thanks to low viscosity provide launch of the engine and lubricant of the main knots at a negative temperature of air;
– summer – thanks to high viscosity provide lubricant of details of the engine at high temperature of air;
– all-weather – at a low temperature of air have viscosity of winter oils, and at high – viscosity of summer oils.

    
PREVENTION
Use of engine oils is strictly forbidden:
– not intended for petrol automobile engines;
– with inappropriate operational characteristics;
– not corresponding to a season on viscosity (on SAE classifications).


"previous page
13. Purchase of spare parts
following page"
13.2. Plastic lubricants