Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
17.1. Safety measures when carrying out repair work
17.2. Tools
17.2.1. Main set of tools
17.2.2. Special tools and devices
17.3. Before work
17.4. Restoration of threaded connections
18. Appendices
19. Schemes of electric equipment
 








17-2-1-osnovnojj-komplekt-instrumentov.html

17.2.1. Main set of tools

Even if you will carry out simple repair work, you will need a set of the minimum quantity of tools. The following keys and devices are included in this package:
– set of keys of TORX of types T and E. On the Chevrolet Lanos car a part of fasteners is executed under the TORX tool;
– a set of screw-drivers with flat and crosswise edges of the different sizes, with convenient handles. At the choice of screw-drivers (especially with a crosswise edge) be accurate as the improper size of an edge can break vents in a screw head;
– Rozhkov' set and cap keys. It is desirable to have keys from 5 to 27 mm in size, and at car repairs of import production keys of any size from the specified range, for example "on 15" or "on 18" can be necessary;
– candle keys "on 16" or "on 21" (depending on a standard size of the spark plugs applied on your car);
– a set of keys hexagons of the different sizes (the sizes from 2 to 10 mm with a step of 1 mm are most often necessary);
– passatizh, bokoreza and passatizh with changeable capture;
– hammers of the different sizes with metal and rubber baizes (the last are necessary when carrying out leveling works);
– center punches of the different sizes (are necessary when carrying out drilling works), a set of chisels (it is possible to use to zakontrit a nut or to cut down such which cannot be turned off);
– at work with system of electric equipment special passatizh are necessary for a staving of plugs and plugs, the device for cleaning of wires, the indicator screw-driver and a set of plugs of various standard sizes;
– during the works with remote knots and units a set of face keys with a neck rattle and the cardan hinge is necessary;
– a set of universal strippers of the different sizes for a vypressovka of bearings and other details.

"previous page
17.2. Tools
following page"
17.2.2. Special tools and devices