Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
3.1. The engine is not started
3.2. Malfunctions of system of injection of fuel
3.3. Idling was gone
3.4. Interruptions in operation of the engine
3.5. Diagnostics of a condition of the engine on appearance of spark plugs
3.6. The car moves breakthroughs
3.7. The car badly accelerates
3.8. The engine decayed during the movement
3.9. Oil pressure fell
3.10. Engine overheat
3.11. The rechargeable battery is not recharged
3.12. Launch of the engine from external sources of current
3.13. Malfunctions of electric equipment
3.14. There were foreign knocks
3.15. Problems with brakes
3.16. Wheel puncture
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








3-4-pereboi-v-rabote-dvigatelya.html

3.4. Interruptions in operation of the engine

At interruptions the engine unstably idles, does not develop sufficient power, is raised spends gasoline. Failure of converters of the fulfilled gases is in addition possible. Interruptions, as a rule, are explained by malfunction of nozzles or an electrogasoline pump (see. "Engine power supply system"), malfunction of a spark plug of one of cylinders, an air suction in one of cylinders. It is necessary to find malfunction and whenever possible to eliminate it.
1. Launch the engine and leave it to idle. Approach an exhaust pipe and listen to an exhaust sound. It is possible to bring a hand to a cut of an exhaust pipe — so interruptions are felt better. The sound has to be equal, "soft", one tone. Cottons from an exhaust pipe through regular periods demonstrate that one cylinder does not work because of failure of a candle, lack of a spark at it, about refusal of a nozzle, about a strong suction of air in one cylinder or considerable decrease in a compression in it. Cottons through irregular periods arise because of pollution of sprays of nozzles, strong wear or pollution of spark plugs. If cottons occur through unequal periods, it is possible to try to replace independently all set of candles irrespective of their appearance and a run, however it is better to make it after the appeal to car service for diagnostics and repair of a control system of the engine.
2. If cottons are regular, stop the engine and open a cowl. Check a condition of wires of system of ignition. Isolation of high-voltage wires should not be damaged, and their tips should not be oxidized. If wires are damaged, replace a faulty wire.

GOOD ADVICE
The easiest and at the same time effective way of check of high-voltage wires — check in the dark. Install the car in the dark place, start the engine and open a cowl. Examine high-voltage wires. If isolation of wires is broken, you will see characteristic sparking of blue-violet color ("polar lights"). In this case high-voltage wires demand obligatory replacement.

3. Turn out spark plugs (see. "Replacement and service of spark plugs").

PREVENTION
At removal of tips of high-voltage wires never pull for a wire. Undertake a hand directly a tip, then, turning it here and there, pull.

4. Attentively examine candles and compare their appearance to the photos provided further. If a candle black and damp, it can be thrown out.
5. If all candles look serviceable, establish them into place and connect high-voltage wires. Operating procedure of cylinders 1-3-4-2; numbering of cylinders (1, 2, 3, 4) is conducted from a pulley of a bent shaft of the engine.
6. Take a spare candle. In any way record it on the engine. Connect a high-voltage wire of the 1st cylinder to a spare candle. Launch the engine. If interruptions of the engine amplified, replace a candle in the 1st cylinder obviously serviceable. Put on a high-voltage wire and launch the engine. If interruptions amplified, consistently repeat this procedure with all cylinders to reveal a faulty candle.

PREVENTIONS
The reliable contact of the case of a candle with "weight" is obligatory as at emergence of an additional spark interval (bigger, than a gap between candle electrodes) damage of the block of a control system of the engine or a high-voltage chain of the coil of ignition is possible.
Try to carry out the inspection described above for the shortest time: at long intake of not burned down gasoline in catalytic converter of the fulfilled gases it can fail because of an overheat because gasoline will burn down in it.

If as a result of the taken measures interruptions of the engine are not eliminated, check a compression in each cylinder (see. "Check of a compression in cylinders"). The normal compression — more than 1,0 MPas (10 kgfs/cm2), difference more than 0,1 MPas (1 kgf/cm2) in one cylinder testifies to need of repair of the engine.

"previous page
3.3. Idling was gone
following page"
3.5. Diagnostics of a condition of the engine on appearance of spark plugs