Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
4.1. General provisions
4.2. Daily Service (DS)
4.2.1. Check of wheels
4.2.2. Check of level and a dolivka of oil in the lubrication system
4.2.3. Check of level and dolivka of cooling liquid
4.2.4. Check of level and a dolivka of brake fluid in a tank of a hydraulic actuator of the brake system
4.2.5. Check of level and a dolivka of working liquid in a tank of the hydraulic booster of steering
4.2.6. Check of level and dolivka of windshield washer fluid
4.2.7. Check of external lighting fixtures
4.3. First maintenance (TO-1)
4.4. Second maintenance (TO-2)
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








4-2-2-proverka-urovnya-i-dolivka-masla-v-sistemu-smazki.html

4.2.2. Check of level and a dolivka of oil in the lubrication system

It will be required to you: engine oil, funnel, pure rag.

RECOMMENDATION
Type of engine oil: level of quality of API SJ or ACEA A1/A2/A3, viscosity 5W-40, 10W-40 or 15W-40 (depending on climatic conditions).
    
PREVENTIONS
Before check of level of oil after a trip kill the engine and wait 5–10 min. until oil merges in the pallet.
Add oil of the same brand, viscosity and a class of quality, as well as at used earlier.
Oil level in a case of the engine should not exceed a tag of "MAX", otherwise leaks through laying and epiploons, the raised oil consumption are possible.
Check level, having installed the car on the flat horizontal platform.

The stopper of an oil-filling mouth is located on a cover of a head of the block of cylinders. The index (probe) of level of oil is located in the left part of the block of cylinders near an oil-filling mouth.
1. Take out the index (probe), wipe with a pure rag and again insert it into place.
2. Repeatedly take out the index (probe). Level of an oil film has to be between tags of "MIN" and "MAX". If the level of oil approaches a tag of "MIN" or below it, add oil.
3. For a dolivka of oil turn a stopper of an oil-filling mouth counterclockwise …
4. … also remove it.
5. Fill in oil in the engine, controlling its level by means of the index. Before taking out the index, wait 2–3 min. to allow oil to flow down in a case.
6. After the level of oil reaches demanded, wrap a mouth stopper.

"previous page
4.2.1. Check of wheels
following page"
4.2.3. Check of level and dolivka of cooling liquid