Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
4.1. General provisions
4.2. Daily Service (DS)
4.3. First maintenance (TO-1)
4.3.1. Check and adjustment of a tension of a belt of the drive of the generator and pump of the hydraulic booster of steering
4.3.2. Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner
4.3.3. Check of a belt of the drive of the gas-distributing mechanism
4.3.4. Replacement of oil in the engine and an oil filter
4.3.5. Cleaning of system of ventilation of a case
4.3.6. Check of hoses and connections of the cooling system
4.3.7. Check of system of production of the fulfilled gases
4.3.8. Check of tightness of fuel-supply lines
4.3.9. Replacement of the fuel filter
4.3.10. Replacement of the filtering element of the air filter
4.3.11. Check and adjustment of the drive of switching off of coupling
4.3.12. Check of level and a dolivka of oil in the transmission
4.3.13. Check of protective covers of drives of forward wheels
4.3.14. Check of technical condition of details of a forward suspension bracket on the car
4.3.15. Check of technical condition of details of a back suspension bracket on the car
4.3.16. Check and adjustment of angles of installation of wheels
4.3.17. Survey and check of steering on the car
4.3.18. Check of a free wheeling (side play) of a steering wheel
4.3.19. Check of tightness of a hydraulic actuator of brakes
4.3.20. Check of degree of wear of brake shoes, disks and drums
4.3.21. Check of operation of the vacuum amplifier of brakes
4.3.22. Check of overall performance of the brake system
4.3.23. Check of the parking brake
4.3.24. Service of the rechargeable battery
4.3.25. Replacement and service of spark plugs
4.3.26. Check and adjustment of light of headlights
4.3.27. Body fittings lubricant
4.3.28. Clearing of drainage openings
4.4. Second maintenance (TO-2)
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








4-3-1-proverka-i-regulirovka-natyazheniya-remnya-privoda-generatora-i.html

4.3.1. Check and adjustment of a tension of a belt of the drive of the generator and pump of the hydraulic booster of steering

It will be required to you: keys, assembly shovel.
1. Check a belt tension pressing of a finger a belt branch between pulleys of the generator and pump of the hydraulic booster. When pressing with effort of 100 N (10 kgfs) the deflection of a belt has to make 10–15 mm.
    
NOTE
For check of a tension it is possible to use scales steelyards, delaying their hook a belt branch.

2. For adjustment of a tension of a belt weaken a bolt of fastening of the generator to a tension level.
3. Weaken two nuts of bolts of the lower fastening of the generator to the block of cylinders of the engine, holding bolts from a provorachivaniye.
    
NOTE
The picture of fastening of the generator is for descriptive reasons taken from under the car. Weaken nuts from above from podkapotny space.

4. For a tension of a belt move the generator from the block of cylinders, using the big screw-driver (or an assembly shovel) as the lever, and tighten a bolt of fastening of the generator to a tension level. For weakening of a tension of a belt move the generator to the block of cylinders.
5. Tighten nuts of bolts of fastening of the generator to the block of cylinders of the engine.

"previous page
4.3. First maintenance (TO-1)
following page"
4.3.2. Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner