Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
4.1. General provisions
4.2. Daily Service (DS)
4.3. First maintenance (TO-1)
4.3.1. Check and adjustment of a tension of a belt of the drive of the generator and pump of the hydraulic booster of steering
4.3.2. Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner
4.3.3. Check of a belt of the drive of the gas-distributing mechanism
4.3.4. Replacement of oil in the engine and an oil filter
4.3.5. Cleaning of system of ventilation of a case
4.3.6. Check of hoses and connections of the cooling system
4.3.7. Check of system of production of the fulfilled gases
4.3.8. Check of tightness of fuel-supply lines
4.3.9. Replacement of the fuel filter
4.3.10. Replacement of the filtering element of the air filter
4.3.11. Check and adjustment of the drive of switching off of coupling
4.3.12. Check of level and a dolivka of oil in the transmission
4.3.13. Check of protective covers of drives of forward wheels
4.3.14. Check of technical condition of details of a forward suspension bracket on the car
4.3.15. Check of technical condition of details of a back suspension bracket on the car
4.3.16. Check and adjustment of angles of installation of wheels
4.3.17. Survey and check of steering on the car
4.3.18. Check of a free wheeling (side play) of a steering wheel
4.3.19. Check of tightness of a hydraulic actuator of brakes
4.3.20. Check of degree of wear of brake shoes, disks and drums
4.3.21. Check of operation of the vacuum amplifier of brakes
4.3.22. Check of overall performance of the brake system
4.3.23. Check of the parking brake
4.3.24. Service of the rechargeable battery
4.3.25. Replacement and service of spark plugs
4.3.26. Check and adjustment of light of headlights
4.3.27. Body fittings lubricant
4.3.28. Clearing of drainage openings
4.4. Second maintenance (TO-2)
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








4-3-14-proverka-tekhnicheskogo-sostoyaniya-detalejj-perednejj-podveski-na-avtomobile.html

4.3.14. Check of technical condition of details of a forward suspension bracket on the car

You carry out all checks and works from below the car installed on the elevator or a viewing ditch (with the hung-out forward wheels).
At each maintenance and repair it is necessary to check a condition of protective covers of spherical support of a suspension bracket, on covers there should not be mechanical damages.
Find out whether is not present on details of a suspension bracket of cracks or traces of a zadevaniye against road obstacles or a body, deformation of levers, bars of the stabilizer and its racks, body front details in places of fastening of knots and details of a suspension bracket.
Check a condition of rubber-metal hinges, rubber pillows, spherical hinges of a suspension bracket, and also a condition (draft) of the top support of telescopic racks of a suspension bracket.
Rubber-metal hinges and rubber pillows are subject to replacement at gaps and a unilateral vypuchivaniye of rubber, and also when cutting their face surfaces.

Расположение элементов передней подвески на автомобиле
Fig. 4.2. An arrangement of elements of a forward suspension bracket on the car: 1 – forward hinge (saylentblok) of the lever of a forward suspension bracket; 2 – damping rack; 3 – spring of a forward suspension bracket; 4 – spherical support of a rack; 5 – rack of the stabilizer of cross stability; 6 – bar of the stabilizer of cross stability; 7 – back hinge (saylentblok) of the lever of a forward suspension bracket; 8 – lever of a forward suspension bracket

The arrangement of elements of a forward suspension bracket on the car is shown in fig. 4.2.
On rubber details of a suspension bracket are not allowed:
– rubber aging signs;
– mechanical damages.
On rubber-metal hinges are not allowed:
– signs of aging, crack, unilateral vypuchivaniye of the rubber massif;
– lead of the rubber massif over fittings.
Replace faulty details.

    
PREVENTION
Pay special attention to mechanical damages (deformations, cracks and so forth) suspension bracket elements, especially levers.

1. Check a condition of protective covers of spherical support. If covers are damaged, replace spherical support assembled.
2. Shaking a wheel in the vertical plane, check spherical support for existence of side plays. If there are side plays of spherical fingers, replace support.

    
GOOD ADVICE
When rocking of the hung-out forward wheel it is difficult to distinguish side plays in bearings of naves and in spherical support. Ask the assistant to press a brake pedal: if in this case feel a side play, then spherical support are faulty.

3. Check rubber plugs and saylentblok in places of fastening of levers to a body.
4. Check a condition of rubber plugs of racks of the stabilizer of cross stability...
5. … and also rubber pillows of left …
6. … and right fastenings of a bar of the stabilizer to a car body.
7. Check a condition of the protection cover of a damping rack.
8. Replace the faulty or damaged details.

"previous page
4.3.13. Check of protective covers of drives of forward wheels
following page"
4.3.15. Check of technical condition of details of a back suspension bracket on the car