Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
4.1. General provisions
4.2. Daily Service (DS)
4.3. First maintenance (TO-1)
4.3.1. Check and adjustment of a tension of a belt of the drive of the generator and pump of the hydraulic booster of steering
4.3.2. Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner
4.3.3. Check of a belt of the drive of the gas-distributing mechanism
4.3.4. Replacement of oil in the engine and an oil filter
4.3.5. Cleaning of system of ventilation of a case
4.3.6. Check of hoses and connections of the cooling system
4.3.7. Check of system of production of the fulfilled gases
4.3.8. Check of tightness of fuel-supply lines
4.3.9. Replacement of the fuel filter
4.3.10. Replacement of the filtering element of the air filter
4.3.11. Check and adjustment of the drive of switching off of coupling
4.3.12. Check of level and a dolivka of oil in the transmission
4.3.13. Check of protective covers of drives of forward wheels
4.3.14. Check of technical condition of details of a forward suspension bracket on the car
4.3.15. Check of technical condition of details of a back suspension bracket on the car
4.3.16. Check and adjustment of angles of installation of wheels
4.3.17. Survey and check of steering on the car
4.3.18. Check of a free wheeling (side play) of a steering wheel
4.3.19. Check of tightness of a hydraulic actuator of brakes
4.3.20. Check of degree of wear of brake shoes, disks and drums
4.3.21. Check of operation of the vacuum amplifier of brakes
4.3.22. Check of overall performance of the brake system
4.3.23. Check of the parking brake
4.3.24. Service of the rechargeable battery
4.3.25. Replacement and service of spark plugs
4.3.26. Check and adjustment of light of headlights
4.3.27. Body fittings lubricant
4.3.28. Clearing of drainage openings
4.4. Second maintenance (TO-2)
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








4-3-3-proverka-remnya-privoda-gazoraspredelitelnogo-mekhanizma.html

4.3.3. Check of a belt of the drive of the gas-distributing mechanism

1. For simplification of access remove the air filter (see. "Removal and installation of the air filter, muffler of noise of an admission and air duct").
2. Remove a forward cover of the drive of the gas-distributing mechanism (see. "Installation of the piston of the first cylinder in the provision of VMT of a step of compression").
3. Examine a condition of a belt of the drive of the gas-distributing mechanism. Replace a belt if at survey you find:
– oil traces on any surface of a belt;
– wear tracks of a gear surface, a crack, undercuts, folds and peeling of fabric from rubber;
– cracks, folds, deepenings or cambers on an external surface of a belt;
– a razlokhmachivaniye or stratification on face surfaces of a belt.


PREVENTION
The belt with traces of engine oil on any its surface should be replaced as oil quickly destroys rubber. The reason of hit of oil on a belt (usually owing to violation of tightness of epiploons of cranked and distributive shaft) should be eliminated immediately.

4. Check a belt tension. Correctly tense belt has to turn on 90 ° from the effort of fingers of 15-20 N (1,5–2 kgfs) enclosed in the middle between pulleys of cranked and distributive shaft. If necessary adjust a belt tension (see. "Replacement and adjustment of a tension of a belt of the drive of the gas-distributing mechanism and replacement of its tension roller").
5. Establish details as it should be, the return to removal.

"previous page
4.3.2. Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner
following page"
4.3.4. Replacement of oil in the engine and an oil filter