Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
4.1. General provisions
4.2. Daily Service (DS)
4.3. First maintenance (TO-1)
4.3.1. Check and adjustment of a tension of a belt of the drive of the generator and pump of the hydraulic booster of steering
4.3.2. Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner
4.3.3. Check of a belt of the drive of the gas-distributing mechanism
4.3.4. Replacement of oil in the engine and an oil filter
4.3.5. Cleaning of system of ventilation of a case
4.3.6. Check of hoses and connections of the cooling system
4.3.7. Check of system of production of the fulfilled gases
4.3.8. Check of tightness of fuel-supply lines
4.3.9. Replacement of the fuel filter
4.3.10. Replacement of the filtering element of the air filter
4.3.11. Check and adjustment of the drive of switching off of coupling
4.3.12. Check of level and a dolivka of oil in the transmission
4.3.13. Check of protective covers of drives of forward wheels
4.3.14. Check of technical condition of details of a forward suspension bracket on the car
4.3.15. Check of technical condition of details of a back suspension bracket on the car
4.3.16. Check and adjustment of angles of installation of wheels
4.3.17. Survey and check of steering on the car
4.3.18. Check of a free wheeling (side play) of a steering wheel
4.3.19. Check of tightness of a hydraulic actuator of brakes
4.3.20. Check of degree of wear of brake shoes, disks and drums
4.3.21. Check of operation of the vacuum amplifier of brakes
4.3.22. Check of overall performance of the brake system
4.3.23. Check of the parking brake
4.3.24. Service of the rechargeable battery
4.3.25. Replacement and service of spark plugs
4.3.26. Check and adjustment of light of headlights
4.3.27. Body fittings lubricant
4.3.28. Clearing of drainage openings
4.4. Second maintenance (TO-2)
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








4-3-7-proverka-sistemy-vypuska-otrabotavshikh-gazov.html

4.3.7. Check of system of production of the fulfilled gases

The system of production of the fulfilled gases does not demand special service. Rather periodically to check reliability of an inhaling of threaded connections and an integrity of pillows of a suspension bracket. In case of damage, through corrosion or a progar elements of system replace assembled.

GOOD ADVICE
At the increased noise level from system of release check its tightness. For this purpose launch the engine and examine all system. Having run a hand over places of possible leak, not concerning knots, you feel leak of gases at once. If necessary replace the rusted and burned through knots.

PREVENTIONS
Before repair let's cool down to system of release as in operating time of the engine it heats up to high temperature.
The fulfilled gases are poisonous, poisoning with them occurs imperceptibly therefore before launch of the engine in a garage surely open gate!

USEFUL TIPS
At impossibility to replace defective knot new it is possible to restore temporarily its working capacity, having imposed a metal patch on the damaged place and having fixed it by collars or a wire. Under a patch it is recommended to enclose the sheet of asbestos.
In shops of auto parts there are on sale special sets for restoration of knots of system of production of the fulfilled gases by means of which it is possible to eliminate temporarily damages of system to reach to car service or a garage.


"previous page
4.3.6. Check of hoses and connections of the cooling system
following page"
4.3.8. Check of tightness of fuel-supply lines