Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
4.1. General provisions
4.2. Daily Service (DS)
4.3. First maintenance (TO-1)
4.4. Second maintenance (TO-2)
4.4.1. Replacement of a belt of the drive of the generator and pump of the hydraulic booster of steering
4.4.2. Replacement of a belt of the drive of the compressor of the conditioner
4.4.3. Replacement and adjustment of a tension of a belt of the drive of the gas-distributing mechanism and replacement of its tension roller
4.4.4. Replacement of brake fluid in hydraulic actuators of brakes and switching off of coupling
4.4.5. Replacement of cooling liquid
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








4-4-1-zamena-remnya-privoda-generatora-i-nasosa-gidrousilitelya-rulevogo-upravleniya.html

4.4.1. Replacement of a belt of the drive of the generator and pump of the hydraulic booster of steering

According to the recommendation of manufacturer a belt of the drive of the generator and pump of the hydraulic booster of steering it is necessary to change each 60 thousand km or 6 years of operation (depending on what will come earlier).
You will need two keys "on 12".     
1. Take off a conditioner compressor drive belt (see. "Replacement of a belt of the drive of the compressor of the conditioner").
2. Weaken a bolt of fastening of the generator to a tension level …
3. … and two nuts of bolts of fastening of the generator to the block of cylinders of the engine, holding bolts from a provorachivaniye.

    
NOTE
The picture of fastening of the generator is taken from under the car for descriptive reasons. Weaken nuts from above from podkapotny space.

4. Move the generator to the block of cylinders to weaken a belt tension.
5. Take off a belt of the drive of the generator and pump of the hydraulic booster of steering.
7. Establish into place a belt of the drive of the compressor of the conditioner and adjust its tension (see. "Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner").

"previous page
4.4. Second maintenance (TO-2)
following page"
4.4.2. Replacement of a belt of the drive of the compressor of the conditioner