Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Check of a compression in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in the provision of VMT of a step of compression
5.6. Removal, installation and troubleshooting of a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. Head of the block of cylinders
5.9. Removal and installation of the engine
5.10. Repair of the engine
5.11. Lubrication system
5.12. Cooling system
5.13. System of production of the fulfilled gases
5.13.1. Features of a design
5.13.2. Replacement of pillows of a suspension bracket of system of production of the fulfilled gases
5.13.3. Replacement of the main muffler
5.13.4. Replacement of the additional muffler
5.13.5. Replacement of converter of the fulfilled gases or a pro-rate
5.13.6. Replacement of a reception pipe
5.13.7. Removal and installation of thermoscreens
5.14. Engine power supply system
5.15. System of catching of vapors of fuel
5.16. System of recirculation of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








5-13-6-zamena-priemnojj-truby.html

5.13.6. Replacement of a reception pipe

1. Turn off three nuts of fastening of a flange of a reception pipe to a final collector...


GOOD ADVICE
Nuts of fastening of a flange of a reception pipe after long operation "burn" to hairpins. In order to avoid breakage of hairpins before an otvorachivaniye moisten threaded connections with WD-40 liquid (or structures, similar it) or kerosene.
We recommend to replace at each dismantling of connection nuts new as sides of nuts can be crumpled and at the subsequent inhaling (otvorachivaniya) can break absolutely then it will be very difficult to turn off a nut.

2. … and three nuts of fastening of a flange of a reception pipe to a flange of converter of the fulfilled gases (or to a pro-rate flange).
3. Remove a system suspension bracket pillow from an arm on a reception pipe …
4. … separate flanges of a reception pipe and converter …
5. … shift a flange of a reception pipe from hairpins of a final collector and remove a pipe.
6. Remove sealing laying from converter flanges...
7. … and final collector.
    
GOOD ADVICE
Replace new sealing laying between flanges of a reception pipe, converter (pro-rate) and a final collector at each dismantling of connection as strongly pressed out laying will not provide reliable consolidation.

8. Establish a reception pipe as it should be, the return to removal.

"previous page
5.13.5. Replacement of converter of the fulfilled gases or a pro-rate
following page"
5.13.7. Removal and installation of thermoscreens