Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Check of a compression in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in the provision of VMT of a step of compression
5.6. Removal, installation and troubleshooting of a flywheel
5.7. Replacement of details of consolidation of the engine
5.7.1. Replacement of laying of a cover of a head of the block of cylinders
5.7.2. Replacement of laying of a head of the block of cylinders
5.7.3. Replacement of oil scraper caps
5.7.4. Replacement of an epiploon of the camshaft
5.7.5. Replacement of epiploons of a bent shaft
5.7.6. Replacement of consolidation of an oil case
5.7.7. Replacement of laying of an inlet pipe
5.7.8. Replacement of laying of a final collector
5.8. Head of the block of cylinders
5.9. Removal and installation of the engine
5.10. Repair of the engine
5.11. Lubrication system
5.12. Cooling system
5.13. System of production of the fulfilled gases
5.14. Engine power supply system
5.15. System of catching of vapors of fuel
5.16. System of recirculation of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








5-7-1-zamena-prokladki-kryshki-golovki-bloka-cilindrov.html

5.7.1. Replacement of laying of a cover of a head of the block of cylinders

If the oil leak from under a cover of a head of the block of cylinders did not manage to be eliminated with tightening of bolts of fastening of a cover, replace its laying.
It will be required to you: a key "on 10", the screw-driver with a flat edge, passatizh.
1. Weaken a collar of fastening of a hose of system of ventilation of a case of the engine to a branch pipe of a cover of a head of the block of cylinders, having squeezed passatizham its unbent ears, shift a collar on a hose …
2. … also disconnect a hose from a cover.
3. Turn out eight bolts of fastening of a cover of a head of the block of cylinders …
4. … also uncover.
5. Take laying from grooves of a cover and examine. Replace strongly pressed out, hardened or torn laying.
6. Carefully clear the privalochny surfaces of the case of the camshaft and a cover of a head of the block of cylinders of the remains of laying and sealant (at its existence).

    
USEFUL TIPS
For the best sealing before installation of new laying apply a thin film of sealant on the privalochny surface of the case.
After cleaning do not degrease the privalochny surface of the case. It will allow in case of use of sealant further without difficulties to uncover.

7. Lay laying in grooves of a cover of a head of the block of cylinders.
8. Establish a cover of a head of the block of cylinders and all removed details as it should be, the return to removal. Tighten bolts of fastening of a cover evenly cross-wise the moment specified in the appendix 1.

"previous page
5.7. Replacement of details of consolidation of the engine
following page"
5.7.2. Replacement of laying of a head of the block of cylinders