Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Check of a compression in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in the provision of VMT of a step of compression
5.6. Removal, installation and troubleshooting of a flywheel
5.7. Replacement of details of consolidation of the engine
5.7.1. Replacement of laying of a cover of a head of the block of cylinders
5.7.2. Replacement of laying of a head of the block of cylinders
5.7.3. Replacement of oil scraper caps
5.7.4. Replacement of an epiploon of the camshaft
5.7.5. Replacement of epiploons of a bent shaft
5.7.6. Replacement of consolidation of an oil case
5.7.7. Replacement of laying of an inlet pipe
5.7.8. Replacement of laying of a final collector
5.8. Head of the block of cylinders
5.9. Removal and installation of the engine
5.10. Repair of the engine
5.11. Lubrication system
5.12. Cooling system
5.13. System of production of the fulfilled gases
5.14. Engine power supply system
5.15. System of catching of vapors of fuel
5.16. System of recirculation of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








5-7-5-zamena-salnikov-kolenchatogo-vala.html

5.7.5. Replacement of epiploons of a bent shaft

At detection of traces of dribble of oil through epiploons of a bent shaft at first check whether the system of ventilation of a case is littered and whether hoses of system of ventilation of a case are pressed, if necessary eliminate malfunctions. If the leak of oil does not stop, replace epiploons.
Sign of need of replacement of a forward epiploon of a bent shaft is the oil leak through its edge. At the same time oil is sprayed by the rotating pulley of a bent shaft owing to what greasy are all forward part of the engine and a belt of the drive of the gas-distributing mechanism.
It will be required to you: all tools necessary for removal of the drive of the gas-distributing mechanism (see. "Replacement and adjustment of a tension of a belt of the drive of the gas-distributing mechanism and replacement of its tension roller"), back and lower covers of the drive of the gas-distributing mechanism (see. "Removal and installation of the oil pump"), covers of a head of the block of cylinders (see. "Replacement of laying of a cover of a head of the block of cylinders"), screw-driver, hammer.
For replacement of a forward epiploon of a bent shaft execute the following.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Install the piston of the 1st cylinder in the provision of VMT of a step of compression (see. "Installation of the piston of the first cylinder in the provision of VMT of a step of compression").
3. Take off a belt of the drive of the gas-distributing mechanism (see. "Replacement and adjustment of a tension of a belt of the drive of the gas-distributing mechanism and replacement of its tension roller").
4. Uncover back and lower the drive of the gas-distributing mechanism (see. "Removal and installation of the oil pump").
5. Having hooked the screw-driver, take an epiploon from the case of the oil pump.
6. Oil a working edge of a new epiploon engine and install it in the case of the oil pump, having oriented a working edge in the engine.
7. Press an epiploon in a pump housing against the stop by means of a mandrel. As a mandrel it is possible to use a head of the suitable size from tool kit or an old epiploon.
8. Establish details and knots as it should be, the return to removal.
9. Adjust a tension of belts of the drive of the generator and pump of the hydraulic booster of steering (see. "Check and adjustment of a tension of a belt of the drive of the generator and pump of the hydraulic booster of steering"), and also the conditioner compressor (see. "Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner").
Can be the reasons of oiling of clutch plates to flow an epiploon of a main shaft of the transmission or a back epiploon of a bent shaft.
Motor and transmission oils have a different smell therefore at a certain skill it is possible to determine by a smell, defective, what of epiploons.

    
GOOD ADVICE
There is one more way of definition like oil. Drip oil in the water poured in a vessel by a thin layer (it is possible in a pool). Gearbox oil will spread on all water surface in the form of an iridescent film, and motor will remain in the form of the drop similar to lentil grain.

For replacement of a back epiploon execute the following.
1. Remove the transmission (see. "Removal and installation of the transmission").
2. Remove coupling (see. "Removal and installation of coupling").
4. Examine an epiploon: if he lost tightness, in its lower part will be visible began to flow oils.
5. Having hooked the screw-driver, take an epiploon.
6. Oil engine a working edge of a new epiploon …
7. … establish it in a nest of the block of cylinders, having oriented a working edge in the engine, and accurately fill a working edge on a neck of a bent shaft.
8. Press an epiploon in a nest against the stop, using an old epiploon as a mandrel.
9. Establish the removed knots as it should be, the return to removal.

    
NOTE
At installation of a flywheel grease a carving part of bolts of its fastening with an anaerobic clamp of a carving.

"previous page
5.7.4. Replacement of an epiploon of the camshaft
following page"
5.7.6. Replacement of consolidation of an oil case