Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
6.1. Coupling
6.1.1. Features of a design
6.1.2. Removal and installation of coupling
6.1.3. Replacement of a fork and bearing of switching off of coupling
6.1.4. Replacement of the main cylinder of the drive of switching off of coupling
6.1.5. Replacement of the working cylinder of the drive of switching off of coupling
6.1.6. Replacement of a hose and tube of a hydraulic actuator of switching off of coupling
6.1.7. Removal and installation of a pedal of coupling
6.1.8. Pumping of a hydraulic actuator of switching off of coupling
6.2. Transmission
6.3. Drives of forward wheels
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








6-1-3-zamena-vilki-i-podshipnika-vyklyucheniya-scepleniya.html

6.1.3. Replacement of a fork and bearing of switching off of coupling

You will need a key "on 13".
1. Remove the transmission (see. "Removal and installation of the transmission").
2. Turn out a bolt of fastening of a fork to a coupling switching off shaft...
3. … also take a shaft from a coupling case.
4. Remove a coupling switching off fork.
5. If necessary take top from a coupling case …
6. … and lower coupling switching off shaft plugs.
7. Remove the bearing of switching off of coupling from the directing plug.
8. Establish details as it should be, the return to removal. At installation of plastic plugs of a shaft of switching off of coupling pay attention to that the ledge (it is shown by an arrow on a photo of item 6) on the plug got to a groove on inflow of a case. Grease plugs with jellied lubricant. Before installation of the bearing of switching off of coupling grease the external surface of the directing plug with a thin layer of jellied lubricant.

"previous page
6.1.2. Removal and installation of coupling
following page"
6.1.4. Replacement of the main cylinder of the drive of switching off of coupling