Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
6.1. Coupling
6.1.1. Features of a design
6.1.2. Removal and installation of coupling
6.1.3. Replacement of a fork and bearing of switching off of coupling
6.1.4. Replacement of the main cylinder of the drive of switching off of coupling
6.1.5. Replacement of the working cylinder of the drive of switching off of coupling
6.1.6. Replacement of a hose and tube of a hydraulic actuator of switching off of coupling
6.1.7. Removal and installation of a pedal of coupling
6.1.8. Pumping of a hydraulic actuator of switching off of coupling
6.2. Transmission
6.3. Drives of forward wheels
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








6-1-7-snyatie-i-ustanovka-pedali-scepleniya.html

6.1.7. Removal and installation of a pedal of coupling

The pedal of coupling is removed for replacement of plastic plugs of its axis and the plug of a finger of a fork of a pusher of the main cylinder of the drive of switching off of coupling at emergence of a scratch, jamming or at the increased side play, and also for replacement of a returnable spring at its damage.
It will be required to you: two keys "on 15", passatizh.
1. Disconnect a pusher of the main cylinder of the drive of switching off of coupling from a coupling pedal. For this purpose passatizham remove a lock washer of a finger of a fork of a pusher …
2. … also take a finger from openings of a fork and a pedal.
3. Holding a key a pedal axis from a provorachivaniye, turn off a key and an axis nut.
4. Take an axis from openings of a pedal and an arm …
5. … also remove a pedal, having brought a groove and the pedal lever out of gearing with a returnable spring
.
6. If necessary remove a returnable spring, having brought its unbent ends out of arm openings.
7. Remove the finger plug from a pedal …
8. … and two plugs of an axis.
9. Establish details as it should be, the return to removal.

    
PREVENTION
At installation of a pedal of coupling track that the groove and (see a photo of item 5) the lever of a pedal would enter gearing with a returnable spring.


"previous page
6.1.6. Replacement of a hose and tube of a hydraulic actuator of switching off of coupling
following page"
6.1.8. Pumping of a hydraulic actuator of switching off of coupling