Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
6.1. Coupling
6.2. Transmission
6.2.1. Features of a design
6.2.2. Possible malfunctions of the transmission, their reason and ways of elimination
6.2.3. Replacement of oil in the transmission
6.2.4. Replacement of epiploons of the transmission
6.2.5. Removal and installation of the transmission
6.2.6. Dismantling and assembly of the transmission and troubleshooting of its details
6.2.7. Repair of a secondary shaft
6.2.8. Repair of a main shaft
6.2.9. Repair of the synchronizer
6.2.10. Repair of differential
6.2.11. Repair of the mechanism of gear shifting
6.2.12. Repair of hinges of the drive of gear shifting
6.2.13. Removal, installation and repair of the coulisse of a control lever transmission
6.2.14. Adjustment of the drive of control of the transmission
6.3. Drives of forward wheels
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








6-2-12-remont-sharnirov-privoda-pereklyucheniya-peredach.html

6.2.12. Repair of hinges of the drive of gear shifting

Gear shifting drive:
1 – gear shifting lever tip;
2 – gear shifting lever;
3 – draft of the choice of transfers;
4 – gear shifting shaft hinge;
5 – gear shifting shaft;
6 – gear shifting lever hinge

At increase in gaps in the drive of gear shifting there is a vibration of the lever of gear shifting during the movement, and gear shifting becomes indistinct and complicated. In this case it is necessary to repair drive hinges.
You will need the screw-driver.
1. For replacement of plugs of the hinge of the lever of gear shifting wring out the screw-driver lever axis clamps …
2. … also take an axis from openings of the hinge of the lever and an arm of a back support of the power unit. Take away the gear shifting lever from an arm.
3. Take two plastic plugs of the hinge from lever openings.
4. Remove rubber damping plugs from each plastic plug …
5. … and sealing rings. Replace the hardened or damaged rubber plugs and rings.
6. Collect the gear shifting lever hinge in the sequence, the return dismantling.
7. For repair of the hinge of a shaft of gear shifting remove a spring clamp …
8. … also take a gear shifting drive hinge axis. Separate hinge forks.
9. Take out a plastic cracker from a shaft fork.
10. Collect the hinge of draft of gear shifting in the sequence, the return dismantling.
11. Draft of the choice of transfers is made assembled with hinges therefore at emergence of side plays in hinges of draft replace draft assembled.
12. Wring out a plastic clamp of the hinge …
13. … also remove the hinge from a spherical finger of the lever of gear shifting.
14. Similarly disconnect the second hinge and remove draft.
15. Establish draft of the choice of transfers to the sequences, the return to removal.

    
NOTE
If after repair of hinges of the lever and draft of gear shifting, and also after replacement of draft of the choice of transfers in the drive the raised side play remained, so gaps in other non-demountable hinges of the drive are increased. In this case replace the drive assembled.

"previous page
6.2.11. Repair of the mechanism of gear shifting
following page"
6.2.13. Removal, installation and repair of the coulisse of a control lever transmission