Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
6.1. Coupling
6.2. Transmission
6.2.1. Features of a design
6.2.2. Possible malfunctions of the transmission, their reason and ways of elimination
6.2.3. Replacement of oil in the transmission
6.2.4. Replacement of epiploons of the transmission
6.2.5. Removal and installation of the transmission
6.2.6. Dismantling and assembly of the transmission and troubleshooting of its details
6.2.7. Repair of a secondary shaft
6.2.8. Repair of a main shaft
6.2.9. Repair of the synchronizer
6.2.10. Repair of differential
6.2.11. Repair of the mechanism of gear shifting
6.2.12. Repair of hinges of the drive of gear shifting
6.2.13. Removal, installation and repair of the coulisse of a control lever transmission
6.2.14. Adjustment of the drive of control of the transmission
6.3. Drives of forward wheels
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








6-2-14-regulirovka-privoda-upravleniya-korobkojj-peredach.html

6.2.14. Adjustment of the drive of control of the transmission

After performance of work, connected with separation of the drive of gear shifting, and also at indistinct gear shifting in operation adjust the drive.
It will be required to you: keys "on 12", "on 14".

Fig. 6.5. Arrangement of a stopper of an adjusting opening: 1 – gear shifting shaft; 2 – gear shifting mechanism cover; 3 – stopper of an adjusting opening; 4 – switch of transfers

1. Take a stopper of an adjusting opening from a cover of the mechanism of gear shifting (fig. 6.5).
2. Switch the transmission to neutral situation.
3. In a motor compartment weaken an inhaling of klemmovy connection of the drive of gear shifting, having provided free mutual movement of a tip of the lever of gear shifting and draft.
4. Turn a gear shifting shaft so that the core with a diameter of 5,0 mm (for example, a shaft of a suitable drill) inserted into an opening of a cover 2 (see fig. 6.5), got to an adjusting opening of the switch 4.
6. Install the gear shifting lever in the provision of the choice of I or II transfers and, having combined openings in the persistent plug of the lever of gear shifting and the case of the lever, fix the lever, having inserted the second core with a diameter of 5,0 mm into the combined openings.
7. Delay klemmovy connection of the drive of gear shifting, take out cores from adjusting openings on the lever of gear shifting and a cover of the mechanism of gear shifting and establish a stopper of an adjusting opening in a cover.
8. Check the clearness of inclusion of transfers. If necessary repeat adjustment.

"previous page
6.2.13. Removal, installation and repair of the coulisse of a control lever transmission
following page"
6.3. Drives of forward wheels