Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
8.1. Features of a design
8.2. Steering column
8.3. Steering drafts
8.4. Steering mechanism
8.4.1. Pumping of system of the hydraulic booster of steering
8.4.2. Adjustment of a gap in the steering mechanism
8.4.3. Replacement of a tank of the hydraulic booster of the steering mechanism
8.4.4. Replacement of the steering mechanism
8.4.5. Replacement of the pump of the hydraulic booster of steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








8-4-3-zamena-bachka-gidrousilitelya-rulevogo-mekhanizma.html

8.4.3. Replacement of a tank of the hydraulic booster of the steering mechanism

It will be required to you: a face head "on 10", passatizh.
1. Remove a stopper of a tank of the hydraulic booster of steering.
2. Pump out working liquid from a tank (for example, the big syringe) and establish a stopper into place that dirt did not get to a tank.
3. Remove the bringing hose for what squeeze the unbent short moustaches of a collar of a passatizhama and shift a collar on a hose.
    
NOTE
The backpressure valve which is not allowing to follow working liquid from a tank is installed in the union of a tank. If via the valve working liquid follows …
… take it from the union and replace.

4. Turn out two bolts of fastening of a tank.
5. Remove the taking-away hose for what squeeze the unbent short moustaches of a collar of a passatizhama and shift a collar on a hose, then remove a tank of the hydraulic booster of steering from the car.
6. Establish details as it should be, the return to removal.

"previous page
8.4.2. Adjustment of a gap in the steering mechanism
following page"
8.4.4. Replacement of the steering mechanism