Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
8.1. Features of a design
8.2. Steering column
8.3. Steering drafts
8.4. Steering mechanism
8.4.1. Pumping of system of the hydraulic booster of steering
8.4.2. Adjustment of a gap in the steering mechanism
8.4.3. Replacement of a tank of the hydraulic booster of the steering mechanism
8.4.4. Replacement of the steering mechanism
8.4.5. Replacement of the pump of the hydraulic booster of steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








8-4-5-zamena-nasosa-gidrousilitelya-rulevogo-upravleniya.html

8.4.5. Replacement of the pump of the hydraulic booster of steering

It will be required to you: keys "on 10", "on 12", "on 16", "on 22", a face head "on 12", the screw-driver with a flat edge, passatizh.
1. Take off a belt of the drive of the generator and pump of the hydraulic booster of steering (see. "Replacement of a belt of the drive of the generator and pump of the hydraulic booster of steering").
2. Turn out three bolts of fastening of a pulley of the pump of the hydraulic booster, holding a pump pulley from a provorachivaniye the screw-driver …
3. … also remove a pulley.
4. Holding the union from a provorachivaniye, the second key turn off a pipeline nut …
5. … also take the pipeline from the union.

NOTE
Connection of the pipeline with the pump is condensed with a rubber ring which needs to be replaced at each separation.

6. Squeeze the unbent short moustaches of a collar of a passatizhama, shift a collar towards the pump …
7. … also remove a hose from a tube.

PREVENTION
Take measures against an effluence of working liquid from pipelines, having muffled them, for example, wooden traffic jams.

8. Remove a collar from a tube.
9. Turn out two bolts of fastening of the pump of the hydraulic booster …
10. … also remove the pump from the car assembled with the soaking-up pipeline.
11. Turn out two bolts of fastening of a flange of the soaking-up pipeline …
12. … also disconnect the pipeline from a pump housing.

NOTE
Connection of the pipeline with the pump is condensed with a rubber ring which needs to be replaced at each separation.

13. Establish details as it should be, the return to removal, and remove air from system of the hydraulic booster (see. "Pumping of system of the hydraulic booster of steering").

"previous page
8.4.4. Replacement of the steering mechanism
following page"
9. Brake system