Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
17.1. Safety measures when carrying out repair work
17.2. Tools
17.3. Before work
17.4. Restoration of threaded connections
17.4.1. Otvorachivaniye of rusty threaded connections
17.4.2. Otvorachivaniye of the damaged nuts
17.4.3. Bolts with an internal hexagon or a many-sided head
17.4.4. A reversing of the self-cutting screws with direct and crosswise vents
17.4.5. Reversing and vvorachivaniye of hairpins
17.4.6. Drilling of the broken bolt
17.4.7. Cutting of a carving
17.4.8. Councils for body repair
18. Appendices
19. Schemes of electric equipment
 








17-4-7-narezka-rezby.html

17.4.7. Cutting of a carving

Very often in the course of repair there is a need of restoration of the damaged carving or cutting new.
In light-alloy metals the carving is cut quite easily as unlike steel their hardness is low. If it is impossible to cut a carving of the suitable size, cut a carving of the bigger size.
Restoration of the crumpled, damaged carving or cutting of new takes place in three stages, cut a carving consistently three taps: at first a tap with the first number (it has one ring pro-point on a shaft), then a tap with the second number (with two ring pro-points on a shaft) and, at last, a tap with the third number (with three ring pro-points or without protocheck). Before a vvorachivaniye taps need to be oiled.
That when cutting a carving the tap did not break, rolling it, periodically turn out for clarification from the formed shaving back.

"previous page
17.4.6. Drilling of the broken bolt
following page"
17.4.8. Councils for body repair