Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
4.1. General provisions
4.2. Daily Service (DS)
4.3. First maintenance (TO-1)
4.3.1. Check and adjustment of a tension of a belt of the drive of the generator and pump of the hydraulic booster of steering
4.3.2. Check and adjustment of a tension of a belt of the drive of the compressor of the conditioner
4.3.3. Check of a belt of the drive of the gas-distributing mechanism
4.3.4. Replacement of oil in the engine and an oil filter
4.3.5. Cleaning of system of ventilation of a case
4.3.6. Check of hoses and connections of the cooling system
4.3.7. Check of system of production of the fulfilled gases
4.3.8. Check of tightness of fuel-supply lines
4.3.9. Replacement of the fuel filter
4.3.10. Replacement of the filtering element of the air filter
4.3.11. Check and adjustment of the drive of switching off of coupling
4.3.12. Check of level and a dolivka of oil in the transmission
4.3.13. Check of protective covers of drives of forward wheels
4.3.14. Check of technical condition of details of a forward suspension bracket on the car
4.3.15. Check of technical condition of details of a back suspension bracket on the car
4.3.16. Check and adjustment of angles of installation of wheels
4.3.17. Survey and check of steering on the car
4.3.18. Check of a free wheeling (side play) of a steering wheel
4.3.19. Check of tightness of a hydraulic actuator of brakes
4.3.20. Check of degree of wear of brake shoes, disks and drums
4.3.21. Check of operation of the vacuum amplifier of brakes
4.3.22. Check of overall performance of the brake system
4.3.23. Check of the parking brake
4.3.24. Service of the rechargeable battery
4.3.25. Replacement and service of spark plugs
4.3.26. Check and adjustment of light of headlights
4.3.27. Body fittings lubricant
4.3.28. Clearing of drainage openings
4.4. Second maintenance (TO-2)
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








4-3-11-proverka-i-regulirovka-privoda-vyklyucheniya-scepleniya.html

4.3.11. Check and adjustment of the drive of switching off of coupling

It will be required to you: keys "on 7", "on 12", "on 13" (two), the screw-driver, a ruler.
1. To measure a full speed of a pedal of coupling, measure distance from an overlay of a pedal to a floor, without pressing a pedal.
2. Press a pedal against the stop and repeat measurement. The difference between two measurements is also a full speed of a pedal of coupling which nominal rate of 130-136 mm. If the course of a pedal differs from nominal rate, it needs to be adjusted.
3. Weaken on pedal knot an inhaling of a lock-nut of an adjusting bolt a key and rotation of a bolt achieve the required value of a full speed of a pedal, tighten a lock-nut.
4. To define a free wheeling of a pedal of coupling, measure distance from the initial provision of a pedal to situation in which when pressing a pedal increase in resistance is felt as a hand. Nominal free wheeling of a pedal of coupling of 8-15 mm. If the free wheeling differs from nominal rate, adjust length of a pusher of the main cylinder of coupling for what …
5. … weaken a lock-nut inhaling …
6. … and, rotating a pusher for a lyska, adjust a free wheeling of a pedal, tighten a lock-nut.

"previous page
4.3.10. Replacement of the filtering element of the air filter
following page"
4.3.12. Check of level and a dolivka of oil in the transmission