Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Check of a compression in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in the provision of VMT of a step of compression
5.6. Removal, installation and troubleshooting of a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. Head of the block of cylinders
5.9. Removal and installation of the engine
5.10. Repair of the engine
5.11. Lubrication system
5.12. Cooling system
5.13. System of production of the fulfilled gases
5.14. Engine power supply system
5.15. System of catching of vapors of fuel
5.15.1. Features of the device
5.15.2. Removal, installation and valve check of a purge of an adsorber
5.15.3. Removal and installation of an adsorber
5.16. System of recirculation of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








5-15-3-snyatie-i-ustanovka-adsorbera.html

5.15.3. Removal and installation of an adsorber

The adsorber of system of catching of vapors of fuel is removed for check or replacement at emergence of persistent smell of the gasoline caused by its leakage. Besides, violation of tightness of an adsorber can become the reason of unstable operation of the engine idling up to its stop.
The adsorber is installed in the protection cover on the basis of a body on the right behind.
It will be required to you: a key "on 10", passatizh, the screw-driver with a crosswise edge, bokoreza.
1. Separate the pipeline of ventilation of the fuel tank, having squeezed its clamps.
2. Similarly separate the pipeline of removal of vapors of fuel in an inlet pipe.
3. Have a bite bokorezam (or knife) a collar of fastening of hoses and pipelines as it holds a hose of removal of vapors of fuel from an adsorber in an inlet pipe.
    
NOTE
Collar of fastening of hoses and pipelines of one-time use.

4. Turn out a bolt of fastening of a casing of an adsorber to an arm on the basis of a body …
5. … shift an adsorber on arm guides in the direction of the movement of the car forward …
6. … also remove an adsorber from the car, extending its atmospheric hose from the protection cover of a bulk pipe of the fuel tank down.
7. In need of replacement of an adsorber turn out three screws of fastening of a cover of its casing …
8. … also cast away a cover.
9. Having squeezed clamps of steam hoses, remove their tips from adsorber branch pipes …
10. … also take hoses from its casing.
11. Weaken a collar of fastening of an atmospheric hose, having squeezed passatizham its unbent ears, shift a collar on a hose …
12. … also remove a hose from an adsorber branch pipe.
13. Take an adsorber from a casing.
14. Remove the rubber sealing plug of an atmospheric hose from an adsorber branch pipe …
15. … or take the plug from a hose if it remained in it. Replace strongly hardened or cracked sealing plug.
16. Collect and establish an adsorber as it should be, the return to dismantling and removal.

"previous page
5.15.2. Removal, installation and valve check of a purge of an adsorber
following page"
5.16. System of recirculation of the fulfilled gases